Cisco Catalyst Heart Template Labs – Dynamic Automation, Half 8

Overview

On this episode of our ongoing Catalyst Heart Automation Collection, our focus is on utilizing a number of dynamic approaches to automating the community. Now we have beforehand, within the collection, concentrated our efforts on particular ideas regarding automation. Nonetheless, on this Self-Paced Standalone Lab, we’ll begin to mix varied concepts to present you a extra in-depth take a look at what is feasible via automation supplied by Catalyst Heart. We are going to automate the entry layer with Dynamic templates, which might auto-provision ports primarily based on PoE occasions. Throughout this lab, we’ll make the most of varied velocity templates mentioned in Lab 7 to cope with particular use instances in order that Catalyst Heart provisioning can allow these use instances through automation. This permits you, the community administrator, with the aptitude to unravel extra kinds of configuration points from Catalyst Heart and to cope with the dynamics of an enterprise community.

In contrast to the earlier Labs within the collection, this lab is a self-contained lab and has no dependencies on any of the earlier labs. When you can add ideas from Labs 5 and 6 to this lab, it’s designed to haven’t any pre-configuration. It makes use of varied automation methods to point out the whole artwork of the attainable in a non-Software program Outlined Entry strategy.

Inside this collection, we cowl the next;

1. PnP Preparation – explains the general Plug and Play arrange steps
2. Onboarding Templates – explains in-depth easy methods to deploy Day 0 templates
3. Day N Templates – dives into Day N template constructs with each common and composite templates and use instances
4. Utility Policys – explores Utility Policys and SD-AVC in Catalyst Heart and their use
5. Telemetry – explains easy methods to deploy Telemetry for assurance
6. Superior Automation – explores Superior Automation methods
7. Dynamic Automation – a deployment lab for dynamic automation

What is going to I study within the Dynamic Automation Lab?

That is an enablement kind module inside the Wired Automation lab, and it permits prospects to succeed in past what they at the moment perceive by making an attempt new ideas, actually pushing the boundaries of automation. We are going to cowl varied matters about template logic to unravel a number of use instances throughout this lab. We cowl some earlier ideas with an in-depth give attention to broadening their capabilities.

The idea of this lab is so that you can construct the surroundings from Discovery and PnP via to deployment. Permitting a secure place so that you can strive, modify, and get used to the varied ideas and approaches.

Method

Preparation

The Lab is constructed for minimal intervention making use of issues like Relaxation-API run through Postman inside a group runner to rapidly configure Catalyst Heart. This permits us to deploy Settings, Credentials, Uncover Units, Construct Websites, Buildings, Flooring, and assign the units to these websites. It is a highly effective instance of what might be performed, as a result of it demonstrates how rapidly you may get Catalyst Heart up and operating using Relaxation-API utilizing only one device.

For the Microsoft Home windows surroundings, DNS and DHCP providers are applied utilizing a PowerShell script for velocity of implementation. This permits us to rapidly add DHCP Scopes and DNS Entries for the required providers within the lab surroundings.

However wait there’s extra…

Templates

We use templates throughout the lab to configure all of the {hardware} gear, in preparation for the Plug and Play onboarding of the entry change, after which deploy the DayN Composite template to fully configure the change in probably the most dynamic approach attainable permitting for using low-impact mode depending on what kind of machine is plugged into the change. All templates and tasks for Catalyst Heart within the lab are downloaded as JSON information and imported permitting for minimal arrange time.

There are such a lot of superior configurations provided throughout the lab that point must be spent after set as much as delve into and perceive all of them. Upon getting mastered all these ideas you need to be on the level the place you possibly can cope with most automation duties demanded in fashionable enterprise networks.

Matters

The assorted matters we’ll contact on and deploy throughout the lab encompass the next:

1. Integrating Catalyst Heart and Identification Companies Engine through PxGrid
2. Utilizing Relaxation-API to configure Catalyst Heart through Postman Command Runner
3. Using Discovery to onboard community units
4. Provisioning Common and Composite Templates to Found Units
5. Pattern PowerShell scripts to simplify DHCP and DNS deployment
6. Plug and Play (PnP) Onboarding of Units
7. Common and Composite Templates for Routers and Switches
8. Autoconf and Embedded Occasion Supervisor
9. IBNS 2.0 configuration
10. Working with  Identification Service Engine (ISE) Profiling and Insurance policies

Use Circumstances

We are going to cowl the Matters above in a number of use instances to point out the aptitude and adaptability of the templating engine inside Catalyst Heart. On this lab we make the most of Velocity language. Equally, we will make the most of the Jinja2 language though not on this lab. These had been the matters within the earlier lab we coated that are related:

1. Renaming interfaces
2. Constructing Stacks
3. Assigning port configuration
4. Autoconf port configuration
5. Non SDA IBNS 2.0 port configuration

With that, the lab makes use of these matters;

We are going to acquire a sensible understanding of the steps related to organising a Catalyst Heart and an surroundings to help complicated, superior, common templates to ship machine configuration throughout these labs. The labs intention to assist engineers in quickly starting utilizing Catalyst Heart automation and assist them work in direction of a worldwide template technique. Moreover, these labs will give prospects a everlasting place to check out the common and composite templates and embrace configurations for varied use instances. Lastly, this surroundings will allow engineers to scale back the effort and time wanted to instantiate the community.

Further issues coated within the lab;

Autoconf

In these labs, we use Autoconf, an answer that manages port configurations for information or voice VLAN, high quality of service (QoS) parameters, storm management, and MAC-based port safety on finish units to deploy configuration in an automatic approach within the entry layer of a community. Machine classification is enabled while you allow the Autoconf characteristic utilizing the autoconf allow world configuration mode command. The machine detection acts as an occasion set off, which in flip applies the suitable automated template to the interface. When the Autoconf characteristic is enabled utilizing the autoconf allow command, the default Autoconf service coverage is utilized to all of the interfaces. For extra details about Autoconf. Autoconf and service-policies right now can’t co-exist on the identical interface and so for interfaces which have templates statically assigned to the interface with service-policy attachment for authentication we might make use of different strategies to make the interface Dynamic.

EEM scripts

EEM scripts use some type of occasion to set off them. Throughout the EEM script, you possibly can reconfigure interfaces, ship occasion notifications through electronic mail and rather more. On this lab we use EEM scripts to reconfigure interfaces on a down occasion to a base closed authentication template, and modify them to low affect mode when a PoE Energy up occasion is detected. The makes use of for such a script are quite a few, and this lab covers one particular use case however an imaginative thoughts can give you many different makes use of for such a characteristic.

Self-Destructing EEM scripts

Self-Destructing EEM scripts are those who delete themselves on termination. Throughout the EEM script, code removes the EEM applet from the configuration, after which writes the configuration to NVRAM. The makes use of for such a script are quite a few, and this lab covers one particular use case however an imaginative thoughts can give you many different makes use of for such a characteristic.

IBNS 2.0 Configuration

Whereas not overlaying all of the facets of IBNS 2.0, we cowl the configuration that we might implement with a view to permit for automating host onboarding inside a non-SD-Entry campus community. These ideas whereas not constructed into a proper UI inside Catalyst Heart for legacy networks permit organizations that want to automate their infrastructure the prospect to automate.

The format of the code inside all these sections of the lab is in a straightforward copy-to-paste window permitting you to import them into Catalyst Heart just by pasting them into the editor.

Beginning…

Inside DCLOUD, a number of sandbox-type labs can be found. These self-contained environments are there to assist you to use them as you please throughout the time scheduled. As well as, this enables us a spot to start out working towards varied ideas with out worry of impacting manufacturing environments.

Consequently, we hope to demystify among the complexities of organising automation and assist information prospects via the caveats. Subsequently, to assist prospects within the transition towards automation, now we have put collectively a set of small useful labs inside a GitHub repository. On this approach, these self-guided labs present a glimpse into the basics of constructing velocity templates and supply examples which you could obtain and develop from. As well as, the pattern templates and JSON information provided are for simple import into Catalyst Facilities’ template editor for faster adoption. Lastly, some scripts are ready-made excerpts of code that assist you to construct the surroundings to check.

Throughout the Wired Automation lab, within the Superior Automation module, we step-by-step delve into superior automation strategies and methods to make the most of them to unravel varied use instances. Second, we offer solutions and explanations to lots of the questions that come up throughout automation workshops. We hope that you simply discover the data each useful and informative.

The place can I take a look at and check out these labs?

DCLOUD Lab Setting

To assist prospects succeed with Cisco Catalyst Heart automation, it’s possible you’ll make the most of the above labs as they’ve been designed to work inside DCLOUD’s Cisco Enterprise Networks {Hardware} Sandbox Labs in both:

1. Cisco Enterprise Networks {Hardware} Sandbox West DC
2. Cisco Enterprise Networks {Hardware} Sandbox East DC

The DCLOUD labs assist you to run these labs and provides an surroundings to strive the varied code samples. Chances are you’ll select to develop and export your code to be used in manufacturing environments. Additionally, this offers you an surroundings the place you possibly can safely POC/POV strategies and steps with out harming your manufacturing environments. The DCLOUD surroundings additionally negates the necessity for transport gear, lead instances, and licensing points wanted to get transferring quickly. Please do adhere to the perfect practices for the DCLOUD surroundings when utilizing it.

Lab Connectivity

The surroundings permits for a web-based browser consumer for VPN-less connectivity. Moreover, there’s AnyConnect VPN consumer connectivity for individuals who desire it. Select the Cisco Enterprise Community Sandbox. Moreover, it’s possible you’ll select from our San Jose and RTP Services labs by both choosing US East or US West. To entry this or different content material, demonstrations, and labs in DCLOUD, please instantly work together with your Cisco or Associate Account Crew. Your Account groups will schedule the session and share it so that you can use. As soon as booked, comply with the information inside GitHub to finish the duties adhering to the perfect practices of the DCLOUD surroundings.

Content material

The Wired Automation labs, Superior Automation module content material is situated throughout the current DNAC-TEMPLATES repository to present a one-stop-shop for all the mandatory instruments, scripts, templates, and code samples. Inside it are seven labs, which construct upon the tutorials to check the strategies in a lab surroundings. The repository was featured in a earlier publish on Cisco Blogs about Catalyst Heart Templates earlier in Could 2021.

Further Info

Catalyst Heart Template Labs

The beforehand named DNAC Template LABS throughout the DNAC-TEMPLATES GitHub repository goals to information you thru the standard steps required to allow the varied automation duties delivered by Catalyst Heart. This lab will give examples of templates utilized in Catalyst Heart that we will modify for our use and take a look at on gear throughout the LAB surroundings. Further info throughout the lab supplies a well-rounded clarification of Automation strategies with Templates. Lastly, the lab permits for purchasers to make use of Catalyst Heart workflows to observe deploying Onboarding, DayN Templates, and Utility Coverage automation on each Wired and Wi-fi Platforms.

The objective of this lab is for it to be a sensible information to assist engineers to quickly start utilizing Catalyst Heart automation and assist them work in direction of a deployment technique. Moreover, this lab will give prospects a everlasting place to check out the configurations for varied use instances. Lastly, this surroundings will allow engineers to scale back the effort and time wanted to instantiate the community.

Consequently, you’ll acquire expertise in organising Plug and Play onboarding and templates and using all options. Moreover, you’ll use superior templating strategies and troubleshooting instruments. These might assist throughout faultfinding to find out what’s failing in a deployment.

Catalyst Heart Labs

Please use this menu to navigate the varied sections of this GitHub repository. Throughout the a number of folders are examples and clarification readme information for reference. There at the moment are two units of labs, and these are being regularly expanded upon.

In conclusion, in the event you discovered this set of labs and repository useful,

please fill in feedback and suggestions on the way it could possibly be improved.

We’d love to listen to what you suppose. Ask a query or go away a remark under.
And keep related with Cisco on social!

Take a look at our Cisco Networking video channel

Subscribe to the Networking weblog

Share: